Alpine iLX-F409 Halo9 9″ Touchscreen w/ Android Auto & Apple CarPlay Install in 1988 3rd Gen Camaro

Here’s a finished installation of Alpine’s iLX-F409 9″ Halo9 Multimedia Touchscreen Receiver w/ Bluetooth, SiriusXM, Hands-Free Kit, Android Auto, Apple CarPlay, HDMI in/out, and rear backup camera, in a 1988 Third Generation Camaro. The iLX-F409 is among a small handful of receivers that install in a single-din slot, have a permanent (non-mechanized) touchscreen, and support Android Auto.

For installation in a third generation Camaro, the following parts were acquired and installed:
– Alpine iLX-F409 Halo9 Multimedia Receiver w/ Sirius Tuner: https://smile.amazon.com/gp/product/B…
– Crutchfield Single DIN mounting kit for 82-92 Camaro (already had this per previous Kenwood receiver installation)
– Parking Brake Bypass Module for Alpine: https://www.ebay.com/itm/265100742220
– Composite Backup Camera w/ Hidden Rear License Plate Mount: https://smile.amazon.com/gp/product/B…

The background wallpaper on the receiver is customizable, and the 80s retro cyan and magenta Camaro background was designed in Photoshop by yours truly.

Wiring Details that I noted on my car (yours could be different, so proceed with caution):

Alpine System Colors === Camaro Wiring Harness Colors

REMO (Blue/White) === Power Control terminal on amplifier AND Blue on Parking Brake Bypass
REVERSE (Orange/White) === Light Green on Transmission (Reverse Switch on Gear Selector) and Red Wires on Backup Camera
P.ANT (Blue) === Red (Power Antenna)
PARKING BRAKE (Yellow/Blue) === YELLOW on Parking Brake Bypass
ACC (Red) === Yellow (12v IGN switch)
BATT (Yellow) === Orange (12v all the time)
GND (Black) === Black (Ground) AND Black (Ground) on Parking Brake Bypass
Green === Yellow Left Rear+
Green/Black === Dark Brown Left Rear-
White === Light Brown Left Front+
White/Black === Light Grey Left Front-
Gray/Black === Light Green Right Front-
Gray === Dark Green Right Front+
Violet/Black === Blue Rear Right-
Violet === Light Blue Rear Right+

=========

Parking Brake Bypass:

1 BLACK wire on Bypass to radios black wire (radio ground wire(-))
2 BLUE wire on Bypass to BLUE/WHITE STRIPE wire ( remote turn on (+)) on Alpine Radio
3 YELLOW wire on Bypass to YELLOW/BLUE wire [Parking Brake(-)] on Alpine Radio only
4 GREEN wire on Bypass NOT CONNECTED

=========

Automatic Transmission Switch:

Left/Driver side of transmission body, 2 prong plug, underneath shifter.
Dark Blue: +12v Ignition
Light Green: +12v when in reverse (connect to REVERSE on stereo and red wires of backup camera)

Posted in Blog, Projects.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.